Tascam DR-100MKII


DR-100mkII Specifications
Recording Media SD card(64MB~2GB), SDHC card(4GB~32GB)
File System FAT16/32
File Format WAV、MP3
Recording/Playback Format
WAV 44.1/48/96 (HS mode) kHz, 16/24-bit
MP3 44.1/48kHz, 32/64/96/192/256/320kbps
Number of Channels 2 channels(stereo)
Playback Speed Control(VSA) -50% – +16%(1% step)
Analog Input
(Phantom Power Compatible)
XLR-3-31 (1:GND, 2:HOT, 3:COLD)
MIC (Switch is set to MIC)
Input Impendance 2.1kΩ
Nominal Input Level −14dBu
Maximum Input Level +2dBu
LINE 1 (Switch is set to LINE )
Input Impendance 2.5kΩ
Nominal Input Level +4dBu
Maximum Input Level +24dBu
Connetor 1/8″(3.5mm)stereo mini jack
Input Impedance 22 kΩ or more
Nominal Input Level −10dBV
Maximum Input Level +6dBV
Analog Output
Connector 1/8″(3.5mm)stereo mini jack
Output Impendance 200 kΩ
Nominal Output Level -14dBV
Maximum Output Level +6dBV
Headphone Output 1/8″(3.5mm)stereo mini jack
Connector 25mW+25mW(With 32Ω headphone connection)
Maximum Output 25mW+25mW(With 32Ω headphone connection)
Built-in Speaker 0.4W (mono)
Digital Input 3/32” (2.5 mm) TRS jack (using the conversion cable made for this unit)
Format IEC60958-3(S/PDIF)
USB Mini-B type
Format USB2.0 HIGH SPEED mass storage class
REMOTE 3/32” (2.5 mm) TRS jack
Power Supply Lithium-ion rechargeable battery made for this unit (TASCAM BP-L2)
Two AA batteries (Alkaline or Ni-MH batteries)
AC adaptor (TASCAM PS-P520, sold separately)
External battery pack (TASCAM BP-6AA, sold separately)
Power Consumption 4W(maximum)
Battery Life
(Continuous Operation)
Lithium ion batteries (BP-L2)
Built-in mics(UNI/OMNI)
About 5 hours(Recording WAV, 44.1kHz, 16 bit)
Ni-MH batteries
Built-in mics(UNI/OMNI)
About 4 hours(Recording WAV, 44.1kHz, 16 bit)
(w x h x d)
3.15 x 6.024 x 1.378 inch / 80 x 153 x 35 mm
Weight 10.23 oz. / 290g(without batteries)
Operating Temperature range 32–104ºF / 0-40℃
Included Accessories 2GB SD card, Mini USB cable, lithium ion batteries (BP-L2), wireless/wired remote (RC-10), carrying case and windscreen


Audio Performance
Frequency response 20-20kHz +1/-3dB(EXT IN→LINEOUT、Fs44.1kHz、JEITA)
20-22kHz +1/-3dB (EXT IN→LINEOUT、Fs48kHz、JEITA)
20-40kHz +1/-3dB (EXT IN→LINEOUT、Fs96kHz、JEITA)
Distortion Less than 0.01%(XLR LINE 1 IN→LINE OUT, Fs44.1kHz, +24dBu input, JEITA)
S/N Ratio 92dB or more(XLR LINE 1 IN→LINE OUT, Fs44.1kHz, +24dBu input, JEITA)


Computer Requirements
OS Windows XP
Windows Vista
Windows 7
CPU/Clock Pentium 300MHz or better
Memory 128MB or more
USB Port USB2.0 recommended
OS Mac OS X 10.2 or later
CPU/Clock Power PC, iMac, G3, G4, G5 266MHz or more
memory 64MB or more
USB Port USB2.0 recommended